Water level gauge series
Pluviometer series
Gate level gauge series
Evaporation station series
Display instrument series
Flow velocity series
Flood warning series
Groundwater monitoring equipment
Gate control system
Pumping station control system
Geological disaster prevention
Dam monitoring system
Water regime measuring and reporting system
Telemetry terminal products
Soil moisture monitoring system
Agricultural well irrigation control system
Groundwater level automatic monitoring system
Flood warning series
1 Overview
The instrument for measuring precipitation of an instrument, its performance conforms to t↑he national standard GB/T11832-2002 "tipping bucket" requirement<s.
The key component of the instrument is a three dimensional streamlΩined design, which makes the bucket turn over wate₹r more smoothly, and has the function of self cleaning dust and easy" cleaning.
2 structure and characteristics
The instrument consists of a rain mouth, a filter screen, a water funnel, a tipp₽ing bucket assembly, a tipping bucket support, a tilt adjustment device, a reed switch, a signa&l output terminal, a base, a base supporting foot, and a stainless steel cylinder body, etc..
The bucket support of the instrument is an integrated rotary posi✔tioning structure, so that the tipping bucket is more convenieφnt to install and dismantle.
The turning bucket of the instrument is a three dime₩nsional streamline design, and the design has a drop type cambered surface diversion tip, which h∏as beautiful appearance, smooth flow, better water turn£over performance and easy cleaning and maintenance.
Two reed switches are installed on the dry reed pipe of the instrument, one of the two signal o≈utputs is used as the spot count, and the other is used as telemetry÷ message.
This instrument has been factory bucket angle adjustment screw to lock in the >best position and angle of inclination of point screw made red paint seal tr&eatment, users only need to adjust the instrument iδnstallation of anchor supporting feet raised the height of the nut so that the level ofσ bubble is located in the center position can be put into use, does not neλed to re adjust the dump site dip.
3 main technical parameters
3.1 socket diameter: Phi 20000.60mm; sharp edge angle: 40o ~ 45 o
3.2 resolution: 1mm;
3.3 measurement accuracy: less than 2% (indoor artificial precipitation, the displ♠acement of the instrument itself.)
3.4 rain intensity range: 0.01mm ~ 4mm/min (allowed to pa♠ss the maximum rain intensity 8mm/min)
3.5 signal mode: double touch point break signal output
3.6 working environment:
Ambient temperature: 0~50 C
Relative humidity; <95% (40)
3.7 size weight: 216 x 350 2Kg.
The instrument for measuring precipitation of an instrument, its performance conforms to t↑he national standard GB/T11832-2002 "tipping bucket" requirement<s.
The key component of the instrument is a three dimensional streamlΩined design, which makes the bucket turn over wate₹r more smoothly, and has the function of self cleaning dust and easy" cleaning.
2 structure and characteristics
The instrument consists of a rain mouth, a filter screen, a water funnel, a tipp₽ing bucket assembly, a tipping bucket support, a tilt adjustment device, a reed switch, a signa&l output terminal, a base, a base supporting foot, and a stainless steel cylinder body, etc..
The bucket support of the instrument is an integrated rotary posi✔tioning structure, so that the tipping bucket is more convenieφnt to install and dismantle.
The turning bucket of the instrument is a three dime₩nsional streamline design, and the design has a drop type cambered surface diversion tip, which h∏as beautiful appearance, smooth flow, better water turn£over performance and easy cleaning and maintenance.
Two reed switches are installed on the dry reed pipe of the instrument, one of the two signal o≈utputs is used as the spot count, and the other is used as telemetry÷ message.
This instrument has been factory bucket angle adjustment screw to lock in the >best position and angle of inclination of point screw made red paint seal tr&eatment, users only need to adjust the instrument iδnstallation of anchor supporting feet raised the height of the nut so that the level ofσ bubble is located in the center position can be put into use, does not neλed to re adjust the dump site dip.
3 main technical parameters
3.1 socket diameter: Phi 20000.60mm; sharp edge angle: 40o ~ 45 o
3.2 resolution: 1mm;
3.3 measurement accuracy: less than 2% (indoor artificial precipitation, the displ♠acement of the instrument itself.)
3.4 rain intensity range: 0.01mm ~ 4mm/min (allowed to pa♠ss the maximum rain intensity 8mm/min)
3.5 signal mode: double touch point break signal output
3.6 working environment:
Ambient temperature: 0~50 C
Relative humidity; <95% (40)
3.7 size weight: 216 x 350 2Kg.
