Water level gauge series
Pluviometer series
Gate level gauge series
Evaporation station series
Display instrument series
Flow velocity series
Flood warning series
Groundwater monitoring equipment
Gate control system
Pumping station control system
Geological disaster prevention
Dam monitoring system
Water regime measuring and reporting system
Telemetry terminal products
Soil moisture monitoring system
Agricultural well irrigation control system
Groundwater level automatic monitoring system
Telemetry terminal products
Main features:
1 for industrial wireless remote data transmission applications d>eveloped based on mobile GPRS network communication terminal, main±ly for the meteorological, environmental protection, water conservancy, transportati↑on and other sectors of industrial applications.
2 support dual frequency GSM/GPRS, support short message, GPRS communication
3 embedded TCP/IP protocol stack, enter the public Internet through the mobile terminal wit♥hout a host to network, communication, more easily integrated into♥ your system.
4 support static fixed IP and domain name resolution±, support dynamic domain name, any place any acces•s to the public Internet with fixed IP or dynamic domain name computer, authorized, can recei∞ve the data sent by the device.
5 can send data to 1~5 static fixed IP or dynamic domain names at the same time
6 to support data transmission channel, GPRS communication as the main data♣ channel, short message as auxiliary backup data channel.
7 supports remote SMS and wake-up call
8 support online settings parameters to facilitate remote main tenance
9 winsis YD telemetry terminal (RTU) with rainfall detection module, GPRS moπdule, GPRS detection and evaporation water level detectγion module and GPRS integrated more than two kinds of equipment comprehensive detection GPRS module etc.. RTU can also connect sensor d'evices with switch output, serial communication interface (TTL or 485) output. The detection module can automatically report✔ the data according to the setting timing, the quantitative acquisition, and the timing, σand the real-time calling can be achieved by telephone or sms.>
10 RTU with the precipitation, water level and other measurement sensors com'posed of hydrological information observation station, the collected hydrological data throu>gh mobile GPRS communication network to achieve info∞rmation transmission. Its performance conforms to the national 'radio management regulations and technical standards, as well as National Hyd₹rological Telemetry telemetry equipment related standards requirements.
11 RTU own data recording function, through setting or programming can achieve timing, qu©antitative record storage. Record data, power loss is not lost. Record data can be read live or remotely.
12 equipment using mobile G net clock or server clock for timing, doeγs not require regular calibration. If the sensing devi>ce has a real-time clock (such as JFZ-01 type digital gauge) can also be used, the sensing d←evice clock for timing, and can automatic sensing device clock calibration (need sensing equipment® support). RTU uses the timing connection to send data mode, withou£t real-time online, monthly cumulative flow is small, low cost.
13 equipment according to low power design, lithium battery power supply, small solar panels char↑ging, suitable for field without power supply environment.
14 adopting advanced power supply technology, the power supply has wide range of adaptation, stab✔le and reliable equipment, and can be used in indoor or outdoor★ environment.
15 RTU with a controllable power supply output, can ₩provide a power supply for sensor equipment.
16 optimize EMC design, suitable for harsh electromagne♥tic environment and high application requirements.
17 aluminum alloy shell, small size, light weight, b•eautiful and rugged, suitable for embedded applications.
Main technical parameters
1 frequency range: 885 ~ 915Mhz 1710 ~ 1755Mhz
2 bandwidth usage: less than 200Khz
3 transmit power: 33/30dbm + 2dB
4 modulation mode: GMSK
5 sending mode: timing / quantification, wake-up call test
6 acquisition interface: parallel I/O (TTL), RS-485 communication, duplex "serial communication (TTL), passive contacts and so on
7 power supply: 12V ~ 24V DC
8 operating current: < 0.5mA @6V (dormancy), < 12mA @♠12V (idle),
< 100mA @12V (Communication), < 1.5A @12V (peak)
9 power output: the output voltage is equal to the power supply voltage -0.5V, the o↕utput current is less than 1A.
10 working environment: environmental temperature 0~50, relative h±umidity less than 95% (40).
11 size weight: outline size (length * width * height): 220 x 90 x 41 (♠mm), weight: less than 250g (without antenna).
1 for industrial wireless remote data transmission applications d>eveloped based on mobile GPRS network communication terminal, main±ly for the meteorological, environmental protection, water conservancy, transportati↑on and other sectors of industrial applications.
2 support dual frequency GSM/GPRS, support short message, GPRS communication
3 embedded TCP/IP protocol stack, enter the public Internet through the mobile terminal wit♥hout a host to network, communication, more easily integrated into♥ your system.
4 support static fixed IP and domain name resolution±, support dynamic domain name, any place any acces•s to the public Internet with fixed IP or dynamic domain name computer, authorized, can recei∞ve the data sent by the device.
5 can send data to 1~5 static fixed IP or dynamic domain names at the same time
6 to support data transmission channel, GPRS communication as the main data♣ channel, short message as auxiliary backup data channel.
7 supports remote SMS and wake-up call
8 support online settings parameters to facilitate remote main tenance
9 winsis YD telemetry terminal (RTU) with rainfall detection module, GPRS moπdule, GPRS detection and evaporation water level detectγion module and GPRS integrated more than two kinds of equipment comprehensive detection GPRS module etc.. RTU can also connect sensor d'evices with switch output, serial communication interface (TTL or 485) output. The detection module can automatically report✔ the data according to the setting timing, the quantitative acquisition, and the timing, σand the real-time calling can be achieved by telephone or sms.>
10 RTU with the precipitation, water level and other measurement sensors com'posed of hydrological information observation station, the collected hydrological data throu>gh mobile GPRS communication network to achieve info∞rmation transmission. Its performance conforms to the national 'radio management regulations and technical standards, as well as National Hyd₹rological Telemetry telemetry equipment related standards requirements.
11 RTU own data recording function, through setting or programming can achieve timing, qu©antitative record storage. Record data, power loss is not lost. Record data can be read live or remotely.
12 equipment using mobile G net clock or server clock for timing, doeγs not require regular calibration. If the sensing devi>ce has a real-time clock (such as JFZ-01 type digital gauge) can also be used, the sensing d←evice clock for timing, and can automatic sensing device clock calibration (need sensing equipment® support). RTU uses the timing connection to send data mode, withou£t real-time online, monthly cumulative flow is small, low cost.
13 equipment according to low power design, lithium battery power supply, small solar panels char↑ging, suitable for field without power supply environment.
14 adopting advanced power supply technology, the power supply has wide range of adaptation, stab✔le and reliable equipment, and can be used in indoor or outdoor★ environment.
15 RTU with a controllable power supply output, can ₩provide a power supply for sensor equipment.
16 optimize EMC design, suitable for harsh electromagne♥tic environment and high application requirements.
17 aluminum alloy shell, small size, light weight, b•eautiful and rugged, suitable for embedded applications.
Main technical parameters
1 frequency range: 885 ~ 915Mhz 1710 ~ 1755Mhz
2 bandwidth usage: less than 200Khz
3 transmit power: 33/30dbm + 2dB
4 modulation mode: GMSK
5 sending mode: timing / quantification, wake-up call test
6 acquisition interface: parallel I/O (TTL), RS-485 communication, duplex "serial communication (TTL), passive contacts and so on
7 power supply: 12V ~ 24V DC
8 operating current: < 0.5mA @6V (dormancy), < 12mA @♠12V (idle),
< 100mA @12V (Communication), < 1.5A @12V (peak)
9 power output: the output voltage is equal to the power supply voltage -0.5V, the o↕utput current is less than 1A.
10 working environment: environmental temperature 0~50, relative h±umidity less than 95% (40).
11 size weight: outline size (length * width * height): 220 x 90 x 41 (♠mm), weight: less than 250g (without antenna).
